Anti-static mat (Pattern surface)

Tlhaloso e Khutšoanyane:

The anti-static mat (Letlapa la ESD) le entsoe haholo-holo ka thepa e khahlanong le boemo bo sa tsitsang le thepa ea maiketsetso ea rabara e sa fetoheng. Hangata ke sebopeho se nang le likarolo tse peli se nang le botenya ba 2mm, bokaholimo ke lesela le tsitsitseng le ka bang 0.5mm, 'me karolo e ka tlase ke conductive layer.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Anti-static rabara mat / Letlapa la tafole la ESD / Mate oa fatše oa ESD (Bokaholimo ba mohlala)

The anti-static mat (Letlapa la ESD) e entsoe haholo ka thepa ea anti-static le static dissipate thepa ea rabara ea maiketsetso. Hangata ke sebopeho se nang le likarolo tse peli se nang le botenya ba 2mm, bokaholimo ke lera le tsitsitseng le ka bang 0.5mm, 'me karolo e ka tlase ke lesela la conductive le ka bang 1.5mm.
Anti-lipampiri tsa rabara tse tsitsitseng(limmete tsa litafole, limmete tsa fatše) li entsoe ka 100% ea rabara ea boleng bo holimo, 'me re tšepisa hore re ke ke ra ba le rabara leha e le efe ea boemo bo tlaase, rabara ea litšila, rabara e tsosolositsoeng, le likarolo tsa polasetiki. Litafole tsa tafole tse sa thekeseleng le liphahlo tsa fatše li ka etsoa ho latela litlhoko tsa bareki (bolelele, bophara, botenya, mmala, joalo-joalo li ka khethoa).
Lihlahisoa li fetile tlhahlobo ea SGS mme li latela litekanyetso tsa RoHS.

Litlhaloso li fumaneha ho fana

Lebitso la SehlahiswaAnti-static mat/sheet/pad/mosamo
Karolo ea ESD-1003
Lintho tse bonahalang tse Anti-static le static dissipate synthetic rabara
Boholo ba 10mx1.2m, 10mx1.0m, 10mx0.9m, 10mx0.8m, 10mx0.7m, 10mx0.6m
Mmala o Motala/Ntsho,Boputsoa/Botsho,Boputswa/Batsho,Bosehla/Batsho,Batsho/Batsho,
Bosoeu/Botsho
Botenya 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm
Conductivity 10⁶-10⁹Ω
Setaele Paterone bokaholimo

Tlhaloso ea thepa

Phekolo ea bokaholimo	Paterone/Boreleli/Bobenyang/Bothoko/Antislip
Boholo(LXW)	10mx1.2m, 10mx1.0m, 10mx0.9m, 10mx0.8m, 10mx0.7m, 10mx0.6m
Mmala	Botala/Botsho,Boputsoa/Botsho,Boputswa/Botsho,Bosehla/Botsho,Botsho/Botsho, Bosweu/Batsho
Botenya	1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm

Litlhaloso tsa Tekheniki:

Ntho	Lintlha
Resistivity ea lera la bokaholimo	10⁶-10⁹Ω
Resistivity ea lera tlase	10³-10⁵Ω
Bongata ba ho hanyetsa	10⁵-10⁸Ω
Ho lahleheloa ke abrasistivity	<0.02g/cm2
Ho thatafala	70-75
Nako ea ho senyeha ha static	<0.1s
Ho hanyetsa mocheso	-70 ℃ ~ 300 ℃

E etselitsoeng motho:E ka etsoa ho latela litlhoko tsa bareki (bolelele, bophara, botenya, 'mala, setaele joalo-joalo li ka khethoa).

Likaroloana:Tšireletso ea botala le tikoloho, anti-letlapa la rabara le tsitsitsengho hanyetsa ho tsitsitse, ho felisa ho bokellana ha motlakase o sa fetoheng 'meleng oa motho le tikolohong, ho thibela likotsi le likotsi tsa motlakase o sa fetoheng, ho lutla motlakase o sa fetoheng' meleng oa motho, lisebelisoa, lisebelisoa le lisebelisoa lefats'eng, 'me ho felisa kotsi ea 'mele oa motho le tikoloho motlakase o tsitsitseng. Thibela likotsi tsa mollo le ho phatloha ho bakoang ke ho tsoa ha electrostatic sebakeng sa tlhahiso ea lihlahisoa tse tukang le tse phatlohang; thibela ho senyeha ha likarolo le likarolo tse bakoang ke ho tsoa ha electrostatic sebakeng sa tlhahiso ea lihlahisoa tsa elektronike; imolla ho tsieleha ha motlakase le moroalo oa kelello o bakoang ke ho tsoa ha li-electrostatic discharge.

Lintho tsa 'mele:ho hanyetsa acid, khanyetso ea alkali, khanyetso ea oli, mocheso o phahameng o hanyetsanang le 300 ℃ ntle le ho fetoha ha mebala, 400 ℃ e sa chese, ho hanyetsa mocheso o tlaase -30 ℃ ~ -70 ℃ ntle le ho bola; 'mala ke o fanang ka seatla se bulehileng, o koahela benche ea mosebetsi haholo, le tikoloho ea tlhahiso. Ho phaella mesebetsing eohle le thepa ea li-anti-static anti-slip table mats le liphahlo tsa fatše, li-anti-static anti-slip table mats le liphahlo tsa fatše li boetse li na le phello e ntle ea ho thibela ho thella.

Lisebelisoa:

Electrostatic le anti-lipampiri tsa rabara tse tsitsitseng(limmete tsa litafole, limmete tsa fatše) li loketse sebaka sa sefofane, tšireletso ea naha, merafong ea mashala, phofo e ntšo, pyrotechnics, liqhomane tsa motlakase, kopano ea lithunya tsa lithunya, lisebelisoa tsa ho phatloha ha sechaba, li-fireworks, lisebelisoa tsa elektronike, lisebelisoa tsa elektroniki, lisebelisoa le limithara, liteishene tsa litanka tsa peterole e qhibilihisitsoeng. , lisebelisoa tsa elektroniki tsa semiconductor, likhomphutha tsa elektroniki, lisebelisoa tsa puisano tsa elektroniki, le lithupelo tsa tlhahiso ea liindasteri tsa potoloho ea microelectronics le libaka tsa polokelo tse paving static.conductive rabara sheets, anti-letlapa la rabara le tsitsitsengs fatše le libaka tsa mosebetsi e le ho felisa 'Mele oa motho le tikoloho li bokella motlakase o tsitsitseng ho thibela likotsi le likotsi tsa motlakase o sa fetoheng le ho nka mehato e hlokahalang ea ts'ireletso ea electrostatic.

Mosebetsi oa ho penta lakane ea rabara e tsitsitseng le e khahlanong le maemo (tafole mat, mokato oa fatše) fatše le sebaka sa mosebetsi ke ho lutla ka mokhoa o nepahetseng motlakase o tsitsitseng 'meleng oa motho, lisebelisoa, lisebelisoa le thepa lefatšeng, ho felisa kotsi ea static. motlakase mmeleng wa motho le tikolohong. Thibela likotsi tsa mollo le ho phatloha ho bakoang ke ho tsoa ha electrostatic sebakeng sa tlhahiso ea lihlahisoa tse tukang le tse phatlohang; thibela ho senyeha ha likarolo le likarolo tse bakoang ke ho tsoa ha electrostatic sebakeng sa tlhahiso ea lihlahisoa tsa elektronike; imolla khatello ea motlakase le moroalo oa kelello o bakoang ke ho tsoa ha li-electrostatic tsa basebetsi.

Ho beha letlapa la anti-static rabara:

Ho na le mekhoa e 'meli ea ho rala bakeng sa ho tsamaisa motlakase o sa fetoheng le lishiti tsa rabara tse thibelang boemo (limmete tsa litafole, limmete tsa fatše): tse phaphametseng le ho li manamisa.
Paving e phaphametseng ke ho beha lipampiri tsa rabara tse teteaneng tse 2-5mm ka kotloloho fatše, tse tenyetsehang ebile ho bonolo ho li beha, empa likheo lipakeng tsa maqephe a rabara li bonolo ho bokella lerole.
Ho peista ke ho manamisa lakane ea rabara e teteaneng ea 2-5mm e nang le molamu oa rabara oa electrostatic conductive fatše. Lekhalo pakeng tsa maqephe a rabara e ka ba 1.2X1000X10000mm tšesaane lakane rabara le khaola ka 30-50mm bophara rabara hlobolisa le pampiri thipa, 'me joale sebelisa electrostatic conductive rabara mokelikeli peista holim'a lekhalo holim'a lekhalo ka kopanetsweng lakane rabara. U ka boela ua sebelisa sehapa sa pampiri (kapa thipa e khethehileng) ho seha ntlha e otlolohileng ea lakane ea rabara e teteaneng ea 5mm hore e be matsoapong a matle le a mabe 'me u e hakatse hanyenyane, ebe u sebelisa mokelikeli oa rabara oa electrostatic conductive bakeng sa ho kopanya liropeng.

微信图片_20240903113422

Litlhoko tsa motheo tsa motheo:

Mabato a mapolanka, mekato ea asphalt, fuluru ea meaho e mekato e 'meli le ka holimo ke mekato e sirelelitsoeng. Lipampiri tsa koporo li tlameha ho hokelloa fatše pele ho behoa maqephe a rabara. Hangata maqephe a koporo a entsoe ka likotoana tse tšesaane tsa koporo, 'me maqephe a koporo a manehiloe fatše. E kentsoe ka har'a marang-rang a khutlonnetsepa e kopanang ka holimo le ka holimo. Bongata le bongata ba ho beoa ha patch ea koporo ho ka khethoa ho latela litlhoko tsa lithupelo tsa bona tsa tlhahiso le matlo a polokelo. Lipoleiti tsa koporo tse patiloeng li tsitsitse ebile li hokahane ka mokhoa o ts'epahalang lekaleng la static (kapa kutu) ho fana ka mocha oa ho lutla ha motlakase o tsitsitseng. Bakeng sa mobu o se nang li-insulated o kang mobu oa samente le fatše oa terrazzo mokatong oa pele, maqephe a koporo a ka 'na a se ke a kenngoa,' me maqephe a rabara a ka behoa fatše ka ho toba.

ditlhoko tsa fatshe

Litsebiso tsa pampiri ea rabara le ho khomarela fatše:

1. Lipampiri tsa fatše le rabara ha lia lokela ho ba le lerōle, oli, le mongobo, 'me li tlameha ho hloeka le ho omella;
2. Hloekisa bokaholimo bo tla kengoa ka peterole ea 120 ° pele u e peista, ebe u sebelisa mokelikeli oa rabara ka mor'a ho omisa;
3. Thempereichara ea tikoloho e hloka 25℃-42℃, mongobo o lekanyelitsoeng ha o phahametse 60%, ka moea o motle;
4. Ho molemo ho sebelisa lebili la ho sila le mahoashe, sandpaper e mahoashe, faele ea lepolanka, joalo-joalo ho fokotsa hanyenyane holim'a sekhomaretsi sa poleiti ea rabara (moeli oa sekhomaretsi o tlameha ho ba roughened bakeng sa 30-50mm);
5. Mokelikeli oa rabara o tlameha ho hlatsuoa habeli ka borashe fatše le holim'a poleiti ea rabara hore e khomaretsoe. Lekhetlo la pele ke ho omella ka metsotso e 20-30, 'me lekhetlo la bobeli ho omella ho fihlela matsoho a khomarelang hanyenyane a ka kenngoa;
6. Haeba mokelikeli oa rabara o le boima haholo ebile o sa khonehe bakeng sa kaho, o ka hlapolloa ka ho eketsa toluene ho ea ka karo-karolelano ea 10-20% ea mokelikeli oa rabara, ebe o kopantsoe ka mokhoa o ts'oanang.
7. Ka mor'a hore pampiri ea rabara e kenngoe fatše, e phutholle ka makhetlo a fetang 5 ka rolara e chitja e boima ba lik'hilograma tse 5;
8. Ela hloko ho kenya moea le ho thibela mollo nakong ea kaho;
9. Nakong ea tšebeliso ea letlapa la rabara, haeba e fumanoa e omme ebile e kobehile ka lebaka la ts'ebetso ea mechine, joalo-joalo, mokhoa o boletsoeng ka holimo o ka sebelisoa ho lokisa.
Tekanyo ea ho hanyetsa ea anti-static rabara sheet sheeting
Sesebelisoa sa ho lekanya ke tester resistance tester, e nang le motlakase oa potoloho o bulehileng oa DC oa 500V le motlakase o khutšoanyane oa 5mA. Electrode ea ho lekanya e entsoe ka koporo kapa tšepe e sa hloekang ka har'a electrode e tloaelehileng ea cylindrical e nang le bophara ba 60 ± 2mm le boima ba 2 ± 0.2 kg. Electrode e lekanyang e tlameha ho phekoloa ka anti-oxidation.
1. Beha li-electrode tse peli tsa ho lekanya 1m fatše, kopanya li-terminals tse peli tsa mitha ho li-electrode, 'me u lekanye ho hanyetsa pakeng tsa li-electrode;
2. Beha electrode ea ho lekanya fatše, kopanya terminal e le 'ngoe ea mitha ho electrode,' me u kopanye terminal e 'ngoe ho marang-rang a setsi sa workshop le polokelo (haeba ho se na marang-rang a motheo, e ka kopanngoa le metsi- peipi ea metsi e tlatsitsoeng), 'me u lekanye boleng ba ho hanyetsa mobu oa ntlha;
3. Bonyane lintlha tse 5 tsa ho metha li lokela ho khethoa bakeng sa workshop le ntlo ea polokelo. Lintlha tsa ho lekanya li lokela ho khethoa sebakeng seo basebetsi ba tlhahiso ba sebetsang ho sona le ho tsamaea khafetsa, 'me sebaka se tsoang ho setsi sa fatše se lokela ho ba 1m;
4. Ho sa tsotellehe boleng ba ho hanyetsa pakeng tsa lipalo kapa boleng ba ho hanyetsa polar, ho lokela ho nkoa bohlokoa ba lipalo tsa lipalo;
5. Boleng ba ho hanyetsa fatše ba staticconductive rabara sheetke ≤5X10⁴Ω kapa 5X10⁴-10⁶Ω; boleng ba ho hanyetsa fatše ba lakane ea rabara ea antistatic e lokela ho ba boemong ba 10⁶Ω-10⁹Ω.